BONDERITE
® S-FN 310A ACHESON (also called EMRALON 310) is one part of a two-part system with
BONDERITE® S-OT 310B ACHESON. These components create a dispersion that is a phenolic, resin-bonded PTFE lubricant coating easily sprayed onto a wide range of materials. Common substrates include wood, metal, rubber, and plastic. Once cured, the coating provides high corrosion resistance, excellent surface adhesion, superior release properties, and a low coefficient of friction. This dispersion can protect and lubricate components where traditional PTFE coatings cannot be used, in addition to a more uniform film thickness and extended wear life.
To mix BONDERITE
® S-FN 310A and 310B ACHESON, 310A should be slowly added to 310B while using a propeller-type mixer or equivalent equipment. This mixer will create a proper vortex with continuous agitation, resulting in a smooth dispersion.
Application via an atomizing spray gun is recommended to create a desired coating thickness of 10 to 25 micrometers on metal surfaces and 5 to 10 micrometers on rubber. Another appropriate method is electrostatic spray equipment with low internal resistance. For best results, the coating can be cured at one of the following curing cycles:
60 minutes at 300°F (substrate temperature)
10 minutes at 350°F (substrate temperature)
8 minutes at 400°F (substrate temperature)
4 minutes at 500°F (substrate temperature)
